RUENUZЎЗ

Melt-Flow Modifiers

Melt-flow adjustment and improved processing of polymer materials.

TechnoAdd™ Melt Flow Modifier

TechnoAdd™ Melt Flow Modifier is a range of masterbatches for adjusting melt flow and improving the processing of polymer materials.

Insufficient flow can make mould filling, production of thin-walled parts and operation of high-output equipment more difficult. When recycled feedstock is processed, variation in material properties can also affect the production process.

TechnoAdd™ Melt Flow Modifier products help improve melt flow with regard to the polymer base, production technology and finished-product requirements. Selection takes into account the initial material characteristics, required processability and the balance of mechanical properties.

The range includes solutions for polyethylene, polypropylene, ABS and polyamides. The products are used in films, packaging, injection-moulded parts, fibres, nonwovens and polymer compounds.

What melt-flow modifiers help solve

Improved processability and adaptation of polymer-material properties.

01

Insufficient melt flow →

Help improve material flow during processing.

02

Difficult mould filling →

Facilitate moulding of thin-walled and complex products.

03

Limited processing output →

Help adapt the material to high-output production conditions.

04

Unstable properties of the feedstock →

Allow differences between batches of polymer material to be taken into account.

05

Material not matched to the processing technology →

Help select a solution for the requirements of a specific production process.

06

Specific challenges when processing recycled feedstock →

Help improve the processability of materials with modified properties.

TechnoAdd™ Melt Flow Modifier grades

Solutions for adjusting melt flow and improving polymer processing.

How we select a melt-flow modifier

We take into account the polymer base, processing technology and product requirements.

01

Polymer base →

02

We consider the polymer type, formulation and characteristics of the starting material.

03

Initial flow →

04

We assess the melt-flow rate and the material's processing behaviour.

05

Required processability →

06

We determine the required melt-flow and mould-filling characteristics.

07

Production technology →

08

We take into account the requirements of moulding, extrusion, fibre production and compounding.

09

Processing conditions →

10

We consider temperature, output and equipment characteristics.

11

Finished-product properties →

12

We maintain the required balance of flow, mechanical properties and surface quality.

Flow and polymer-material property control

Assessment of melt-flow rate and finished-material characteristics

Initial melt-flow rate (MFR)Melt-flow rate after modificationEffect of dosage on melt-flow rateMelt-flow stability between batchesMaterial processabilityTensile strengthFlexural modulusMaterial impact strength
Based on test results, we select the modifier grade and dosage for the processing requirements and finished-product characteristics.
No.GradeCarrierActive componentFeaturesApplicationTDSSDS
1MFM-02201-LLLLDPEPolyolefin system with oleochemical additivesImproved melt flow and processability of linear polyethyleneFilm extrusion / compounding / recycled LLDPE processingTDSSDS
2MFM-02202-LDLDPEPolyolefin system with oleochemical additivesImproved flow and processing stability of low-density polyethyleneFilm extrusion / blow molding / injection moldingTDSSDS
3MFM-02203-HDHDPEPolyolefin system with oleochemical additivesImproved processing of high-viscosity polyethylene compositions and mold fillingMolding of technical products / industrial containers / compoundingTDSSDS
4MFM-02204-PPPP-HOrganic peroxide system for controlled rheology modificationIncreased polypropylene MFR through controlled molecular-weight reductionInjection molding / thin-wall molding / fibers and nonwovensTDSSDS
5MFM-02206-ABABSCompatible polymer system with oleochemical additivesImproved melt flow and mold filling in ABS product manufacturingHousing parts / technical components / thin-wall productsTDSSDS
6MFM-02207-PAPA6Heat-resistant polyamide system with oleochemical additivesImproved PA6 flow and filling of complex moldsTechnical parts / electrical products / compoundingTDSSDS

Need to improve the flow of a polymer material?

We will select the modifier and dosage with regard to the starting material, processing technology and required MFR.