Insufficient product stiffness →
Increase stiffness and resistance of parts to deformation under load
Polypropylene compounds for manufacturing products with specified properties
Techpolen™ is a range of polypropylene compounds with specified mechanical, thermal and processing characteristics.
The properties of base polypropylene do not always meet finished-product requirements. Insufficient stiffness, impact strength and heat resistance, as well as increased shrinkage, can lead to deformation, warpage and dimensional instability.
Techpolen™ compounds are designed to control mechanical properties, heat resistance, shrinkage and dimensional stability. The material composition is selected with regard to processing technology, service conditions and finished-product requirements.
The range includes mineral-filled, glass-fibre-reinforced and impact-modified compounds, as well as materials with UV-resistant, antistatic and flame-retardant properties. Colour, gloss, matt finish and surface scratch resistance can also be tailored when required.
The products are used in household-appliance parts, automotive components, construction products, industrial containers and packaging.
They help provide the required mechanical, thermal and functional properties of finished products
Increase stiffness and resistance of parts to deformation under load
Increase product resistance to impact loads during production and use
Help reduce shrinkage, warpage and improve dimensional stability
Increase material resistance to operating temperatures
Provide UV resistance, antistatic properties and reduced flammability
Enable selection of colour, gloss, matt finish and scratch resistance
Materials with different compositions and characteristics for manufacturing polymer products
We consider product requirements, material composition, processing and service conditions
We consider the application, geometry and design features of the product
We select the polypropylene base, fillers, reinforcing and modifying components
We define requirements for stiffness, strength, impact resistance and dimensional stability
We consider melt flow, processing method and equipment characteristics
We assess requirements for heat resistance, UV resistance, antistatic properties and flammability
We consider colour, gloss, matt finish and scratch resistance

We evaluate material properties with regard to processing conditions and finished-product requirements
If required, we also evaluate flammability, UV resistance, antistatic properties, colour, gloss and surface scratch resistance.
| No. | PP compound type | Grade | Base | MFR, g/10 min | Features | Application | TDS | SDS |
|---|---|---|---|---|---|---|---|---|
| 1 | Talc-filled | TC-08201 | PP-H | 18 ± 3 | Talc, 10%; increased stiffness, dimensional stability | Household products, lids, injection-molded parts | TDS | SDS |
| 2 | Talc-filled | TC-08202 | PP-H | 15 ± 3 | Talc, 20%; increased stiffness and heat resistance | Housing parts, household appliances | TDS | SDS |
| 3 | Talc-filled | TC-08203 | PP-H | 12 ± 2 | Talc, 30%; high stiffness, reduced shrinkage | Technical products, housing components | TDS | SDS |
| 4 | Talc-filled | TC-08204 | PP-H | 10 ± 2 | Talc, 40%; high stiffness, dimensional stability | Large housings, technical parts | TDS | SDS |
| 5 | Talc-filled | TC-08205 | PP-B | 12 ± 2 | Talc, 20%; polyolefin elastomer POE; increased impact resistance | Automotive parts, protective housings, sewer fittings | TDS | SDS |
| 6 | Talc-filled | TC-08206 | PP-B | 10 ± 2 | Talc, 30%; polyolefin elastomer POE; reduced shrinkage | Large fittings, components of non-pressure piping systems | TDS | SDS |
| 7 | Mineral-filled | CC-08301 | PP-H | 20 ± 3 | Calcium carbonate, 10%; increased stiffness, cost optimization | Household products, injection-molded packaging | TDS | SDS |
| 8 | Mineral-filled | CC-08302 | PP-H | 16 ± 3 | Calcium carbonate, 20%; balance of stiffness and economy | Industrial containers, household products | TDS | SDS |
| 9 | Mineral-filled | CC-08303 | PP-H | 13 ± 2 | Calcium carbonate, 30%; increased stiffness and opacity | Construction products, housing parts | TDS | SDS |
| 10 | Mineral-filled | CC-08304 | PP-H | 10 ± 2 | Calcium carbonate, 40%; high filler content, economy | Technical products, opaque housings | TDS | SDS |
| 11 | Glass-fiber reinforced | GF-08401 | PP-H | 18 ± 3 | Short glass fiber SGF, 10%; increased strength and stiffness | Technical parts, fastening elements | TDS | SDS |
| 12 | Glass-fiber reinforced | GF-08402 | PP-H | 15 ± 3 | Short glass fiber SGF, 20%; strength, dimensional stability | Housing and structural parts | TDS | SDS |
| 13 | Glass-fiber reinforced | GF-08403 | PP-H | 12 ± 2 | Short glass fiber SGF, 30%; high strength and heat resistance | Automotive parts, industrial equipment | TDS | SDS |
| 14 | Glass-fiber reinforced | GF-08404 | PP-H | 9 ± 2 | Short glass fiber SGF, 40%; high stiffness and strength | Load-bearing structural products | TDS | SDS |
| 15 | Glass-fiber reinforced | GF-08405 | PP-B | 12 ± 2 | Short glass fiber SGF, 20%; polyolefin elastomer POE; impact resistance | Automotive components, protective housings | TDS | SDS |
| 16 | Glass-fiber reinforced | GF-08406 | PP-B | 10 ± 2 | Short glass fiber SGF, 30%; polyolefin elastomer POE; impact resistance | Structural parts, industrial equipment | TDS | SDS |
| 17 | Glass-fiber reinforced | GF-08407 | PP-H | 12 ± 2 | Short glass fiber SGF, 30%; thermal stabilization; increased heat resistance | Household appliances, equipment parts | TDS | SDS |
| 18 | Pipe grade | GF-08408 | PP-R | 3 ± 1 | Short glass fiber SGF, 20%; reduced thermal expansion | Reinforcing layer of multilayer PP-R pipes | TDS | SDS |
| 19 | Pipe grade | GF-08409 | PP-R | 3 ± 1 | Short glass fiber SGF, 30%; increased stiffness, reduced thermal expansion | Reinforcing layer of multilayer PP-R pipes | TDS | SDS |
| 20 | Impact-resistant | HI-08501 | PP-B | 12 ± 2 | Polyolefin elastomer POE; increased impact resistance | Industrial containers, household products, sewer fittings | TDS | SDS |
| 21 | Impact-resistant | HI-08502 | PP-B | 10 ± 2 | Reinforced elastomer system POE; high impact resistance | Protective housings, automotive parts | TDS | SDS |
| 22 | Low-temperature resistant | HI-08503 | PP-B | 8 ± 2 | Low-temperature-resistant elastomer system POE; impact resistance at low temperature | Technical containers, outdoor sewer fittings | TDS | SDS |
| 23 | High-gloss | HG-08601 | PP-H | 25 ± 4 | Surface modifier; increased gloss | Front panels, household appliances | TDS | SDS |
| 24 | High-gloss | HG-08602 | PP-B | 18 ± 3 | Surface modifier; polyolefin elastomer POE; gloss and impact resistance | Decorative housings, automotive interiors | TDS | SDS |
| 25 | High-flow | HF-08701 | PP-H | 35 ± 5 | High flow; improved mold filling | Lids, thin-wall containers | TDS | SDS |
| 26 | For IML | HF-08702 | PP-H | 55 ± 7 | Nucleating system; high flow, reduced cooling time | High-speed injection molding IML-packaging and thin-walled containers | TDS | SDS |
| 27 | For IML | HF-08703 | PP-B | 35 ± 5 | High flow; increased impact resistance | IML-pails, impact-resistant containers | TDS | SDS |
| 28 | High-flow | HF-08704 | PP-H | 25 ± 4 | Talc, 20%; increased flow and stiffness | Thin-wall technical parts | TDS | SDS |
| 29 | Transparent | HF-08705 | PP-R | 30 ± 5 | Clarifying system; increased transparency, improved mold filling | Transparent containers, packaging with IML-label | TDS | SDS |
| 30 | Heat-resistant | HT-08801 | PP-H | 18 ± 3 | Nucleating system; increased heat resistance, dimensional stability | Technical products, household-appliance components | TDS | SDS |
| 31 | Heat-resistant | HT-08802 | PP-H | 15 ± 3 | Thermal-stabilization system; resistance to prolonged heating | Equipment parts, housing components | TDS | SDS |
| 32 | Pipe grade | HT-08803 | PP-R | 5 ± 2 | Thermal-stabilization system; property stability at elevated temperature | Pipe elements, fittings | TDS | SDS |
| 33 | Flame-retardant | FR-08901 | PP-H | 15 ± 3 | Flame-retardant system; reduced flammability | Electrical housings, technical products | TDS | SDS |
| 34 | Flame-retardant | FR-08902 | PP-H | 25 ± 4 | Flame-retardant system; increased flow | Thin-wall electrical parts | TDS | SDS |
| 35 | Flame-retardant | FR-08903 | PP-H | 10 ± 2 | Short glass fiber SGF, 20%; flame-retardant system; increased stiffness | Electrical components, load-bearing housings | TDS | SDS |
| 36 | Flame-retardant | FR-08904 | PP-B | 12 ± 2 | Flame-retardant system; polyolefin elastomer POE; impact resistance | Protective housings, electrical equipment | TDS | SDS |
| 37 | Light-stabilized | UV-081101 | PP-H | 15 ± 3 | UV-stabilization system; resistance to solar radiation | Outdoor construction and technical products | TDS | SDS |
| 38 | Light-stabilized | UV-081102 | PP-B | 12 ± 2 | UV-stabilization system; polyolefin elastomer POE; impact resistance | Outdoor housings, garden and technical products | TDS | SDS |
| 39 | Antistatic | AS-081201 | PP-H | 18 ± 3 | Antistatic system; reduced static-charge accumulation | Industrial packaging, injection-molded products | TDS | SDS |
| 40 | Antistatic | AS-081202 | PP-B | 12 ± 2 | Antistatic system; polyolefin elastomer POE; impact resistance | Technical containers, protective housings | TDS | SDS |
The compound grade is selected with regard to product application, processing technology, required material properties and service conditions. Detailed characteristics are provided in the product technical data sheet.
We will select a material with regard to product requirements, processing technology and service conditions