RUENUZЎЗ
TP-LAB · ENGINEERING & TESTING

Formulation development

Creation and adjustment of formulations for the polymer base, processing technology and finished-product requirements.

MechanicalRheologyThermalChemicalOpticalSurfacePilot Extrusion TP

From technical specification to a working formulation

We create and adjust masterbatch and polymer compound formulations with regard to the polymer base, processing technology, equipment parameters and required product characteristics.

Selection of polymer base and components;
masterbatch and compound development;
sample preparation and testing;
formulation adjustment based on test results;
preparation for industrial production.
DEVELOPMENT DIRECTIONS

We develop a formulation for a specific task

We select components and their ratio with regard to the material, processing technology and finished-product requirements.

01

Functional masterbatches

Control of processing, surface and performance properties

02

Colour masterbatches

White, black and coloured formulations with specified colour characteristics

03

Mineral concentrates

Formulations based on CaCO₃, talc and BaSO₄

04

PP compounds

Filled and modified polypropylene formulations

05

ABS compounds

Modified ABS-based materials

06

Custom formulations

Integrated formulations developed to the customer technical brief

DEVELOPMENT TASKS

We manage key material characteristics

01 Processability
Flow adjustmentimproved process stabilityformulation adaptation to equipmentimproved component dispersion
02 Mechanical and dimensional properties
Strengthstiffnessimpact resistanceshrinkagewarpagedimensional stability
03 Colour and appearance
ColourΔEcolour uniformityglosstransparencypigment dispersion
04 Functional properties
Thermal and UV resistanceCOFfilm blockingstabilisationservice durability
Where required, we adapt the formulation to available raw materials and optimise cost without losing the agreed target characteristics.
DEVELOPMENT PROCESS

From a technical task to an industrial formulation

01

Task definition

Material · process · equipment · target properties
02

Analysis and selection

Starting material · components · possible causes of deviations
03

Laboratory development

Formulation · sample preparation · testing
04

Adjustment

Result analysis · formulation change · pilot batch
05

Industrial confirmation

Line trial · operating parameters · preparation for production
ENGINEERING ANALYSIS

Material analysis and corrective solution development

We investigate the material and processing conditions, identify likely causes of deviations and develop changes to the formulation or processing parameters.

01 Unstable processingChanges in flow, pressure or process stability
MFR/MFI, moisture, material composition, temperature profile and dosing stabilityFormulation adjustment, raw-material preparation or processing-parameter correction
02 Colour changeShade deviation, unstable ΔE or yellowing
CIELAB and ΔE, yellowness index, pigment dispersion, thermal and UV exposureAdjustment of pigment system, stabilisation or processing conditions
03 Reduced mechanical propertiesInsufficient strength, stiffness or impact resistance
Tensile, flexural and impact properties, composition and material structureAdjustment of fillers, modifiers, component compatibility or processing conditions
04 Gels, black specks and inclusionsSurface defects and foreign particles in the material
Microscopy, FTIR, visual analysis, filtration and processing conditionsIdentification of contamination source and correction of raw materials, filtration or process settings
05 Component agglomerationUneven distribution of pigments or fillers
Microscopy, dispersion, filler distribution and mixing qualityAdjustment of dispersing system, dosing and compounding conditions
06 High hazeReduced transparency and changed optical properties
Light transmission, haze, dispersion, thickness and component compatibilityOptimisation of formulation, dispersion and process settings to reduce haze
07 Unstable COF and blockingChanges in slip and film-layer sticking
Static and dynamic COF, blocking, additive migration and storage conditionsAdjustment of slip/antiblock system and processing or ageing conditions
08 Shrinkage and warpageChanges in dimensions and product geometry
Moulding shrinkage, dimensional stability, mould temperature, orientation and compositionAdjustment of filling, reinforcement, cooling and processing parameters
PROJECT RESULT

From a laboratory formulation to an industrial solution

01

Formulation

A developed or adjusted formulation for the agreed requirements

02

Tested samples

Material samples and results of the agreed testing programme

03

Pilot batch

Material for checking processability and properties on the customer line

04

Preparation for production

Operating parameters and preparation of the formulation for serial production

The set of transferred documentation and the extent of formulation disclosure are determined by the project terms.

Need to develop or adjust a material?

Describe the polymer base, processing technology, production issue and required product characteristics. TP-LAB specialists will review the task and propose a development programme.

Discuss the task ↗